99 GMC Suburban, alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72019
Printed Date: July 14, 2025 at 9:11 AM

Topic: 99 GMC Suburban, alarm/remote start

Posted By: englishfroggie
Subject: 99 GMC Suburban, alarm/remote start
Date Posted: February 01, 2006 at 11:19 PM

I have a 99 GMC suburban and I am trying to install an alarm with remote start.

I have founs loads of information on this forum and it has been great however... Where do I find the ignition harness to wire it all up to. I have laid on my back in the drivers footwell and looked up and oh my god there are so many wires. Which is the ignision harness?

Also anyone got any ideas on installing and bypass (555L)

Thanks for all your help

Replies:

Posted By: gcorrea
Date Posted: February 01, 2006 at 11:35 PM

from your post, i would suggest taking your truck to a pro, or studing your basics a little more.

-------------
gcorrea

Posted By: 05gt
Date Posted: February 01, 2006 at 11:59 PM

I'm with gcorrea, from what your post sounded like I would get it done professionally, just my 2 cents

Posted By: stonecole
Date Posted: February 02, 2006 at 12:08 AM

I have a 98 Expedition. And there's part of the dash that goes around the bottom of the steering wheel, at least that's how mine was. Just trying to give you an idea. I say the only way to learn is to try. Just be very careful of what you're doing. Then if it feels overwhelming to you seek professional installation.

Posted By: englishfroggie
Date Posted: February 02, 2006 at 12:14 AM

Thanks Stonecole that's exactly what I thought. If I can change a transmission, re-build an engine, I'm sure I can attempt the alarm. As soon as I find it I'm on my way. Hope you have a great night, I'll remove it and tomorrow and see what I see posted_image

Posted By: stonecole
Date Posted: February 02, 2006 at 12:17 AM

No problem. I just completed an install on my Expedition a 791xv viper. It was my first, finished yesterday finally. Have a good night.

Print Page | Close Window