viper 791xv antigrind

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72123
Printed Date: July 07, 2025 at 11:30 AM

Topic: viper 791xv antigrind

Posted By: pttjr
Subject: viper 791xv antigrind
Date Posted: February 03, 2006 at 5:00 PM

Installing viper 791xv in 2005 Yukon Denali. Does anyone know if this vehicle has starter antigrind or do I have to hook it up thru 791xv? if not would I use the yellow igntion switch wire, cut it in half,connecting the green wire to the key side and the purple wire to the other side of the yellow starter side? thanks

Replies:

Posted By: catalin capota
Date Posted: February 03, 2006 at 6:26 PM

If you're going to do your own anti-grind you should be interrupting the starter wire with a relay.

If the Denali has an ignition system that you do not need to keep the key turned while cranking then it should already have anti-grind system built-in.

Posted By: cntrylvr79
Date Posted: February 03, 2006 at 8:56 PM

YEah the truck has the built in anti grind. How ever you still might want to hook it up on the 791 since that is what disables the starter when the alarm is going off.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: catalin capota
Date Posted: February 03, 2006 at 9:55 PM

It won't do any good since the Denali's factory installed immobilizer is much better than the DEI normally closed starter kill.

Posted By: pttjr
Date Posted: February 04, 2006 at 7:11 AM

Thanks for the reply! So then I wont need to connect the green wire only the purple,is that right? Thanks

Posted By: wranglercory
Date Posted: February 08, 2006 at 11:17 AM

I would use the anti grind on the unit .

Print Page | Close Window