remote start on mazda 6

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72315
Printed Date: May 20, 2024 at 6:14 PM

Topic: remote start on mazda 6

Posted By: boosting 6
Subject: remote start on mazda 6
Date Posted: February 06, 2006 at 8:59 PM

how can i do a remote start on a mazda 6. with out it starting when it's in gear. what wire do i need to use and what wire do i connect it to on a g5 clifford

Replies:

Posted By: Teamrf
Date Posted: February 06, 2006 at 9:52 PM

I hear they are making alarms that are capable with manual transmission vehicles.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: KarTuneMan
Date Posted: February 07, 2006 at 11:27 PM

Your G5 clifford Is NOT for a manual trans.....be safe.....get one that is!!

AST, Compustar, Astroflex.......

-------------

Posted By: redpeppers
Date Posted: February 08, 2006 at 12:17 AM

a safe way to do a remote start with that system is .....if your trans. has a wire coming out of it that goes to ground only when the trans. is in neatrul.

-------------
Where theres is a wire there's a way.

Posted By: jacqueslacombe
Date Posted: February 08, 2006 at 4:33 AM

HI ! for info all NISSAN and MAZDA car (not made by FORD ) has a neutral sw in the manual transmission so when I do a rs on those vehicule I use a 2 relais system and a LED for the safety (1 relais is hook up to the neutral sw with the LED to cut the starter feed from the rs if the car is in gear and the LED give me the status of the neutral sw ( use a 12 volt flashing led ) so the car in neutral the LED flashe Car in gear LED no flashe For the other relais I use the parking brake wire (if the park brake is not ON this will cut the ignition to the no.1 relais so even if the car is in neutral you need the parking brake ON the remote start the car . ( With this system use automatic rs no need reserved mode and door trigger and find it safer than rs for manual gear . I use MITTCHEL's ELECTRICAL WIRING manuals for the neutral sw wire color.( BUT if it's your first time let it to the pro)(need diode for the LED cut neutral sw wire attach (-) side of diode to neutral sw side (+) to ECM (engine control module) side ( the LED (-)side to the diode (-) side and the (+) LED side to BAT (+) so when sw in neutral LED on (if you need a diagram jlacombe649@hotmail.com ) gone to CUBA from 9 to 17 feb (GOOD LOCK )

-------------
cocolaboy