1996 dodge ram 2500

 I just installed a avital 4000 remote starter on this truck,it starts fine with the

remote but when i try it with the key it wont start. What did  i do wrong?

Well, did you hook up starter kill with the remote starter?  How did you hook up the starter kill relay?

Normally Closed Starter Kill Relay

The basic starter kill relay diagram shown below, breaks continuity of the lead from the ignition switch to the starter motor (or in some cases i.e.; Ford, to another relay), when the alarm is armed and the ignition is turned on. This is the most commonly used application for disabling the starter. Click here for another starter kill diagram.

Normerly Open Starter Kill

This normally open starter kill relay application below relies on a ground from the alarm when disarmed and 12 volts (+) from the ignition to enable the driver to start the vehicle. * Note: most alarms with this feature will not provide this grounded output when power ,12 volts (+), to the alarm is not present, even if the alarm is grounded.