Transmitter programing menu
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72398
Printed Date: May 16, 2024 at 9:53 AM
Topic: Transmitter programing menu
Posted By: jonchos
Subject: Transmitter programing menu
Date Posted: February 07, 2006 at 10:50 PM
I have been searching for information on the internal programing of a 479X remote. On the back of the remote is a p button that allows you to enter the remote programing. I know that when in this menu you can program beep(lock icon) on or off-Illumination(unlock icon) on or off-page(Star or siren icon) on or off, but what about the AUX or trunk icon? when ever I am in the transmitter menu I press this button(aux or trunk icon) and the hood, trunk signals in the lcd screen will light up with options of either one fo these two on or both on or both off. Does anyone know what is this function for? thank you.
Replies:
Posted By: JWorm
Date Posted: February 07, 2006 at 11:32 PM
It determines what shows up on the remote when the blue multiplexed wire in the primary harness gets triggered.
Posted By: jonchos
Date Posted: February 07, 2006 at 11:40 PM
thanx. that makes sense. I have the blue wire in the primary harness hooked up to the trunk pin.
|