Program a remote for 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72404
Printed Date: May 15, 2025 at 9:05 PM

Topic: Program a remote for 791xv

Posted By: stonecole
Subject: Program a remote for 791xv
Date Posted: February 08, 2006 at 12:59 AM

Do anyone have info on programming another remote for the viper 791xv. Just bought a used remote need to find out how to program it. I have the original remote, needed a second remote.

Any help is appreciated. Thanks in advance.

Replies:

Posted By: turbo6
Date Posted: February 08, 2006 at 3:11 AM

Open the door

turn the ignition on to the on position

press the valet/programming button 2 time and hold it on the 2nd push

you will hear a long confirmation chirp

press the arm button on the new 2-way and you will hear one chip

you will hear a confirmation chirp when the remote button is pressed

turn the ignition off

done

Posted By: stonecole
Date Posted: February 08, 2006 at 10:34 AM

Thanks turbo6, I'll give that a try.

Posted By: wranglercory
Date Posted: February 08, 2006 at 10:52 AM

let us know if you still are having problems programing those remotes are well known to have cold solder joints on the circuit boards

Posted By: stonecole
Date Posted: February 08, 2006 at 10:57 AM

I never tried programming yet. This will be my first time programming this remote. But you said these remotes are known for having cold solder joints?

P.S. my remote should come in a day or two, bought it on ebay. If it don't program, I'll let you know.

Thanks for the heads-up.

Posted By: stonecole
Date Posted: February 11, 2006 at 2:34 PM

Received my remote today and programmed it as described above by turbo6. Excellent! works like a charm.

Thanks for the replies.

P.S. No problems as of yet Wranglercory.

Print Page | Close Window