Print Page | Close Window

Viper 350hv with 791 antenna

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72466
Printed Date: May 20, 2024 at 6:14 AM


Topic: Viper 350hv with 791 antenna

Posted By: diva
Subject: Viper 350hv with 791 antenna
Date Posted: February 08, 2006 at 9:57 PM

has anyone over heard of putting the 791 antenna on a 350 viper alarm to have use of the two-way pager remote?



Replies:

Posted By: genehewett
Date Posted: February 09, 2006 at 1:45 AM
   Its a mith. It wont work. The best trick is to swap the single button cell battery for 2 thiner same diameter batteries with the same voltage each as the single is. You will have to pick the batteries out by looking at the size. The 2 needs to be the same size as the original single. This will add as much as 60% more to the transmitters old range was.




Posted By: gus1
Date Posted: February 09, 2006 at 2:58 PM
Not a myth..... it is "responder ready".... change antenna and antenna wire, program responder remote, done.

Remember, the only difference between a 350HV and a 690XV is just that, the antenna and remote.

Gus


-------------
Wherever I go, that is where I end up......




Posted By: diva
Date Posted: February 10, 2006 at 11:34 PM
okay... but one more question (dumb probly)  will my original 350 remote still work?  can i program it to the 791 antenna?




Posted By: mobilecustoms
Date Posted: February 11, 2006 at 5:56 AM
no it will not work only responder 2 way lcd and the companion remote




Posted By: gus1
Date Posted: February 11, 2006 at 1:11 PM
If you use the 5000's antenna then yes, the 473V that comes with the 350HV will work.

Gus


-------------
Wherever I go, that is where I end up......





Print Page | Close Window