Smartsiren 4 install manual
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72560
Printed Date: July 18, 2025 at 8:30 PM
Topic: Smartsiren 4 install manual
Posted By: mrcllusb
Subject: Smartsiren 4 install manual
Date Posted: February 10, 2006 at 5:31 AM
Anyone have this one?I want to add this to my clifford arrow 3 with intellistart and need to know how this ties in and also if i need to purchase anything else??
-------------
"ole blake"
Replies:
Posted By: scirocco16v
Date Posted: February 10, 2006 at 5:25 PM
the smart siren plugs into the dataport on the control module and then you need to hook up power and ground which can be tied into the power and ground of your arrow 3. Very simple and you do not need anything else. You will need cliffnet wizard if you want to access all siren sounds when personalizing.
Posted By: mrcllusb
Date Posted: February 11, 2006 at 6:16 AM
My problem is my intellistart cable is already in my dataport.That's why i was asking if i need some kind of connector or something that allows more then one thing to be plugged into my dataport??
-------------
"ole blake"
Posted By: scirocco16v
Date Posted: February 11, 2006 at 5:12 PM
The smart siren allows you to daisychain accesories after it, or you could plug the siren ito the extra port on the intellistart, it does not matter where it in the system.
Posted By: mrcllusb
Date Posted: February 11, 2006 at 11:38 PM
Great,thanks for the help..
-------------
"ole blake"
Posted By: Powermyster
Date Posted: February 12, 2006 at 6:28 AM
is the smart siren battery back up
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: mrcllusb
Date Posted: February 12, 2006 at 7:46 AM
Yes it is...but it connects to the clifford dataport on the brain for communication..
-------------
"ole blake"
|