how do i add sensors to arrow 3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72610
Printed Date: July 12, 2025 at 10:07 AM

Topic: how do i add sensors to arrow 3

Posted By: mrcllusb
Subject: how do i add sensors to arrow 3
Date Posted: February 11, 2006 at 6:59 AM

I have a clifford arrow 3 that came with a normal 3 wire(red,black,orange)piezo sensor,and a (red,black,blue,orange)plug for an additional sensor.I want to get rid of the 3 wire piezo sensor and add a dei 506t glass sensor,and a clifford proximity sensor3.The 506t has
(blue,red,black).Do i connect this to the (orange,red,black)harness that was connected to the piezo sensor?

-------------
"ole blake"

Replies:

Posted By: mrcllusb
Date Posted: February 11, 2006 at 7:10 AM

Does anyone have the manual for this clifford sensor?

-------------
"ole blake"

Print Page | Close Window