Hey what's going on ppl?
I have a '03 Toyota Celica which has the RSX 3.5 alarm installed with a 530T module hooked up to both windows and working fine. Now, I am trying to understand on how to actually hook up a 529T Module to my sunroof CORRECTLY, so that the sunroof will tilt up and then fully open via the remote AUX button and then close to the tilt position and fully close when the alarm is armed. I've read many posts of ppl. having trouble with the sunroof not opening completely and just tilting, since a lot of new cars now have one-touch open/close switches for the sunroofs. I've read this post... here's the link but it's dated February 2005 (1 year ago and kinda old). Unfortunately he didn't give enough details to what kind of relay (voltage, amps, type) to use and what kind of diode and how to hook both components up in detail. So I am now posting my own to hopefully get some good answers, suggestions and recommendations.... even stories of pros and cons of ppl's experiences attempting this type of project. If you know what exact relay, diode and the correct way to install it, please, don't hesitate to add a comment to this post!
Thanks in advance,
J.T.
https://www.the12volt.com/installbay/forum_posts.asp?tid=49914&KW=sunroof+529&PN=0&tpn=2
I have info for a 2004.....?
close/tilt up grn / YELLOW NEG(-)
slide open/tilt down pink NEG(-) both wires are at the switch. I'm not sure if the 2 years are the same....so check it out carefully
-------------