2002 Dodge RAM 1500 keyless system

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7271
Printed Date: July 21, 2025 at 8:06 PM

Topic: 2002 Dodge RAM 1500 keyless system

Posted By: Quique
Subject: 2002 Dodge RAM 1500 keyless system
Date Posted: December 28, 2002 at 12:12 PM

Help!. Just bought a factory keyless system for my 2002 Dodge RAM 1500 4x4 quadcab that includes the 16 pin module with a new xmitter. My problem is that I cannot find the plug for the module!. I'd read somewhere that the plug should be somewhere on the driver's side kick panel\emergency brake area but short of taking the whole truck apart, I still can't find the plug!. Can someone tell me where is this 16 pin plug?. Thanks!!

Replies:

Posted By: Velocity Motors
Date Posted: December 28, 2002 at 12:29 PM

Try looking way up high in the driver's kick panel area above the brake for a loose molex plug.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Quique
Date Posted: December 28, 2002 at 12:48 PM

Ooops! Is a 6 pin plug not a 16 pin plug. Thank you, Jeff!. But I still can't find the darn thing!.

Posted By: DanDan
Date Posted: December 28, 2002 at 3:25 PM

The module plugs into the back of the instrument panel. After you install it you will have to take it to the dealer and have it hooked up to the DRB tester to program it. Again the plug is behind the main cluster. Very easy to install but it will have to be programmed with the tester.

DanDan

Posted By: Quique
Date Posted: December 28, 2002 at 4:08 PM

Thank you, Dan Dan!. You guys are great!. I surely treasure your support and quick response. Hopefully I'll be able to find it. Will keep you posted.

Posted By: Quique
Date Posted: December 28, 2002 at 6:38 PM

I guess that I might have to remove the cluster since it is impossible to reach it from underneath. Lot of work and it's too cold out there!. Hopefully I don't need to take it to the dealer. Too costly!. Will continue tomorrow.

Print Page | Close Window