Varad LED with Python alarm?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72781
Printed Date: May 11, 2025 at 2:40 AM
Topic: Varad LED with Python alarm?
Posted By: micros24
Subject: Varad LED with Python alarm?
Date Posted: February 13, 2006 at 9:05 PM
I want to buy a Varad LED to connect into my truck. I have a Python alarm system that currently powers a the Python LED, but I want one that's blue and alot brighter (like Varad). The Varad LED has two wires coming fron the LED into a control box (that controls the blinking and stuff) and then the control box has a positive, a ground, and a switched wire. My questions is: How can I connect a Varad light to my Python alarm so that the Python controls the blinking instead of the Varad control box? I would like to be able to see the status of my alarm on the Varad LED. Can I cut off the control box from the Varad LED, connect the positive wire into a power wire on my truck, and then have the negative going into the Python alarm? I have no clue what I'm talking about so any help is appreciated!!!
Replies:
Posted By: dea,can
Date Posted: February 14, 2006 at 1:42 AM
Hi just go down to the dealer that sells DEI products they sell Blue leds to replace the Red.
-------------
dragon
Posted By: micros24
Date Posted: February 14, 2006 at 2:36 AM
I've considered that, but I want a LED that is much brighter (like a Varad). The shop installed the LED near the steering column, and since it's so dim, it can only be seen from the driver's side. I think if it was brighter, it would be seen from all sides.
Is it possible to connect a brighter LED to my Python alarm system while still being able to have the LED display the alarm diagnostics? I could relocate the light, but I would prefer to keep it in the hole that was already drilled.
Thanks
Posted By: mrcllusb
Date Posted: February 14, 2006 at 4:45 AM
Yes there are brighter lights.Clifford brand leds' are much brighter.Also you can do what i did and get an EL indicator that goes in your window..Cuz i don't want to drill any holes in my dash..
-------------
"ole blake"
Posted By: micros24
Date Posted: February 16, 2006 at 2:06 AM
But is it the actual LED that is brigher or is it the Clifford alarm that puts out more power to it's LED? I mean, is that all I have to do is hook up a Clifford LED into my Python alarm?
|