Viper 791XV Wiring problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72821
Printed Date: May 06, 2024 at 12:47 AM
Topic: Viper 791XV Wiring problem
Posted By: beakerss
Subject: Viper 791XV Wiring problem
Date Posted: February 14, 2006 at 3:52 PM
I am having a problem. I have a 2004 Dodge ram standard cab and just aquired this alarm from my business partner. The problem is the remote start ribbon harness. I understand where everything else goes but this ribbon.
pink/white- 200ma (-) prog ign2 acc2 relay turn on
yellow- (+) ignition input to alarm
pink- (-) 200 ma ignition relay turn-on
orange- (-) 200 ma accessory relay turn-on
purple (-) 200 ma starter relay turn-on
ORANGE / black- (-) antigrind/ground when armed output
blue- (-) 200 ma status output.
My understanding was that the satellite relay was for this with the heavy gauge wires and the ribbon that hooks up the satellite to the brain. If anyone could please help me or not by telling me where they go or if they are needed it would be appreciated. Thank you very much in advance!
Replies:
Posted By: bazzgazm
Date Posted: February 14, 2006 at 11:45 PM
You're right. you're missing the XRC relay center. This should plug into a ribon harness to the brain giving you your high current outputs (starter, ignition, accessory) and 2 inputs (12v constant)
This can probably be purchased on dei's parts website. go to DIRECTELECTRONICS.CoM and see if you have a link there, should be in the neck of 39.99 retail price
|