alarm to trunk light?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72886
Printed Date: May 09, 2024 at 9:47 PM
Topic: alarm to trunk light?
Posted By: shinta86
Subject: alarm to trunk light?
Date Posted: February 15, 2006 at 3:39 PM
I have a 1st gen Neon with a Python 460hp. I know that I use the blue wire from the alarm but what wire do I connect it to? Thanks in advance.
Replies:
Posted By: kohara73
Date Posted: February 15, 2006 at 4:48 PM
Grey/Black at trunk light (-) trigger
-------------
Keith
Posted By: shinta86
Date Posted: February 15, 2006 at 4:49 PM
OK, I connected the blue wire from the alarm to the grey/black wire that runs to the trunk latch but when I turn my alarm on it is telling me that zone 1 is active. If I touch the wires together when the alarm is on then the siren goes off. The whole time my trunk is completely closed.
Posted By: Powermyster
Date Posted: February 15, 2006 at 5:04 PM
is your trunk light working as it should
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: shinta86
Date Posted: February 15, 2006 at 5:05 PM
It comes on when you open the trunk and goes off when you close the trunk. If that is what you mean.
Posted By: Powermyster
Date Posted: February 15, 2006 at 5:20 PM
whats the other wire going to the light it should be +12V. retest your grey/black for neg current with a DMM with door both open and closed should show positive when closed and neg when open
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: dea,can
Date Posted: February 16, 2006 at 3:00 AM
95-99 trunk trigger gray/black wire them both into the door tigger out put on the alarm u going to have to use 1amp diodes with the band facing the switch. 2 diodes needed for this.
-------------
dragon
|