tach signal for '95 chrysler sebring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7289
Printed Date: July 19, 2025 at 10:09 AM

Topic: tach signal for '95 chrysler sebring

Posted By: ericw
Subject: tach signal for '95 chrysler sebring
Date Posted: December 28, 2002 at 5:24 PM

any good idea's about hooking up the tach signal on a '95 chrysler sebring coupe, my wireing diagram says at the ECM but if I could find an easier place I would rather do that. or is at the ECM the easiest and only way to do it. if so which wire in which plug is it?

Replies:

Posted By: JWorm
Date Posted: December 28, 2002 at 5:56 PM

I would go to an injector. Each injector will have two wires. All the injectors will have a wire that is the same color as a wire at the other injectors. Use any of the other wires.

Posted By: Velocity Motors
Date Posted: December 28, 2002 at 9:15 PM

WHITE---------------instrument cluster or PCM ( The PCM is located on the drivers side of the engine compartment or behind the center of the dash depending on motor. )

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window