alarm problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72969
Printed Date: July 06, 2025 at 4:56 AM

Topic: alarm problems

Posted By: seefu
Subject: alarm problems
Date Posted: February 16, 2006 at 8:37 PM

i took replaced the battery on a remote for my aftermarket alarm

and now the alarm wont respond to the remote

the alarm system is an alarm and immobiliser in one so now i cant drive my car either

please help if u may know a solution

Replies:

Posted By: seefu
Date Posted: February 16, 2006 at 8:44 PM

by the way, the actual alarm unit has been untouched and was working perfectly.

i have tried disconnecting and reconnecting the batteries but that still did not work

Posted By: mrcllusb
Date Posted: February 16, 2006 at 8:52 PM

Does you remote have a light on it??Check and see if you installed the battery correctly.If so,you may have lost your programing in the remote.You'll need to enter the alarm programming mode and reprogram your remote..

-------------
"ole blake"

Posted By: seefu
Date Posted: February 16, 2006 at 8:58 PM

thanks for replying mrcllusb

the light on the remote does work and does flash. and how do i enter the alarm programming mode and reprogram my remote?

Posted By: seefu
Date Posted: February 18, 2006 at 8:36 PM

anoyone know anything about a Cobra 7190?

Print Page | Close Window