Print Page | Close Window

proper way to wire 508t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72985
Printed Date: April 29, 2024 at 7:42 AM


Topic: proper way to wire 508t

Posted By: lilboi
Subject: proper way to wire 508t
Date Posted: February 16, 2006 at 11:15 PM

I have a matrix 3.5 with the dual stage shock sensor. How should i be wiring up my 508t. Can i just tap into the exsisting shock sensor wire (ie blue to blue, green to green etc.). I know the dual stage shock has a loop around blue cable. What should be done. Can any one draw up a diagram. Thanks.



Replies:

Posted By: JWorm
Date Posted: February 17, 2006 at 12:47 AM
Connect the green and blue from the 508D to the loose wire on the shock sensor harness.

Connect red from 508D to a fused +12v.

Connect black from 508D to the orange ground when armed wire of matrix 3.5


Print Page | Close Window