remote start, entry, 99 Durango

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73013
Printed Date: July 07, 2025 at 4:37 PM

Topic: remote start, entry, 99 Durango

Posted By: maximum9
Subject: remote start, entry, 99 Durango
Date Posted: February 17, 2006 at 12:49 PM

I'm installing a Bao remote start/entry, the proplem is with the door locks, I've looked up 2-3 different ways that it can be done, and the first was not right for me, this is the wire color codes, I got from Bao, but I don't understand whichtype locks I have ?

POWER LOCK ORANGE / purple

POWER UNLOCK pink/purple

LOCK MOTOR ORANGE / black

UNLOCK MOTOR blue

DOOR TRIGGER blk/blue & tan/red

the backblue catches the drivers door and the tan/red catches all other doors

any help would be great !

Replies:

Posted By: kohara73
Date Posted: February 17, 2006 at 6:38 PM

The truck has positive locks. Meter the ORANGE / purple while locking. Should show +12V, and pink/purple show show +12V when unlocking. If the Boa does not have + lock output, you'll need a relay to reverse polarity.

-------------
Keith

Posted By: maximum9
Date Posted: February 18, 2006 at 8:37 AM

It reads +12 volts all the time, locking and unlocking, and on the Bao web site it says there is no need for a relay, I just can't figure out if it's a 3, a 4or a 5 wire system, I tried it as a 3 wire setup and it don't work

Posted By: kohara73
Date Posted: February 18, 2006 at 12:07 PM

Is this a Boa 265?? I believe the truck is a Type A according to the manual.

-------------
Keith

Posted By: maximum9
Date Posted: February 18, 2006 at 2:17 PM

it's a 265b yes !

Posted By: maximum9
Date Posted: February 18, 2006 at 3:40 PM

and if it 's type A why would they give me the color codes for all those other wires...for the door locks ?

Posted By: kohara73
Date Posted: February 18, 2006 at 3:52 PM

It's using all those other wires because the Boa has built in relays for a positive lock system such as yours. Follow those instructions exactly and it should work.

-------------
Keith

Posted By: maximum9
Date Posted: February 19, 2006 at 1:41 AM

thanks !