04 Navigatior WIndow Rollup
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73098
Printed Date: July 07, 2025 at 10:26 PM
Topic: 04 Navigatior WIndow Rollup
Posted By: digitalas
Subject: 04 Navigatior WIndow Rollup
Date Posted: February 18, 2006 at 6:19 PM
Guys I am having problems trying to do windows up and down in this vehicle. The motor has a internal switch inside for the one touch, how do I bypass the motor or how to I complete this.....
-------------
DigitalAS
Replies:
Posted By: cntrylvr79
Date Posted: February 18, 2006 at 7:16 PM
You have to open the motor up and tie in the wires inside the motor. It sucks a lot
-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer
Posted By: digitalas
Date Posted: February 18, 2006 at 8:03 PM
How do you know what wires to tie into???We got 8 wires at the motor
-------------
DigitalAS
Posted By: digitalas
Date Posted: February 18, 2006 at 8:13 PM
actually 8 wires going into the motor and after dismantling the motor there is two wires and the circuit board
-------------
DigitalAS
Posted By: cntrylvr79
Date Posted: February 18, 2006 at 8:23 PM
The 2 wires are the ones you'll have to use. Sorry I can't get into real detail. I did that once back in early 04 when the truck was new.
-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer
Posted By: digitalas
Date Posted: February 23, 2006 at 3:27 PM
Can anyone shed some light on this issue
-------------
DigitalAS
Posted By: digitalas
Date Posted: February 23, 2006 at 3:30 PM
now I replaced the motor with one that belongs in the rear and when the DEi module is wired the window goes up but it stops ever inch, making you have to press the switch everytime to get it back up, if the dei module is not wired in the window goes up and down smoothly
-------------
DigitalAS
Posted By: Velocity Motors
Date Posted: February 23, 2006 at 3:32 PM
Of the two wires, one is the motor side and one is the coltroller side. Use your mutimeter to test the wires like door lock wires. Once you determine the motor and switch, wire in relays in a 5 wire configuration.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Velocity Motors
Date Posted: February 23, 2006 at 3:36 PM
The DEI module is detecting a voltage spike in the line causing it to stop working.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: digitalas
Date Posted: February 23, 2006 at 3:42 PM
so once we wire the relays in a 5 wireconfiguration that should solve my problem???
-------------
DigitalAS
|