Print Page | Close Window

compustar 2w8000fmr + dei 507M & 520T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73133
Printed Date: May 21, 2024 at 4:20 AM


Topic: compustar 2w8000fmr + dei 507M & 520T

Posted By: jbody
Subject: compustar 2w8000fmr + dei 507M & 520T
Date Posted: February 19, 2006 at 4:06 PM

hey guys,

can you guys tell me which colors are which and where to attach these wires for the additional security that i am going to be installing.  I have Compustar 2W8000FMR and I would like to add DEI 507M digital tilt sensor and DEI 520T back up battery.  I just need to figure out what color wires are what on the brain and which sensor input do I use for the trigger for the backup battery.    And which output do I hook the tilt sensor so that I can at least figure out if its the tilt sensor is set off rather than the knock sensor.  Thanks in advance, tried searching for instructions, but there wasn't any color codes or diagrams for the compustar alarm.




Replies:

Posted By: JWorm
Date Posted: February 20, 2006 at 10:15 AM
You can't use the backup battery. It can only be used on alarm/remote starters that have a seperate power input for the alarm and remote start portions. The Compustar brain gets the power thru one of the 30 amp circuits. The backup battery cannot handle that much current.

There are a few cars you could use a 520T with a Compustar unit, but you didn't provide that info.


Print Page | Close Window