Viper 125HF remote starter
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73149
Printed Date: June 01, 2024 at 4:03 PM
Topic: Viper 125HF remote starter
Posted By: JamesRH
Subject: Viper 125HF remote starter
Date Posted: February 19, 2006 at 10:27 PM
hey all I am wondering if someone can help me, i need the wiring diagram and programming instructions for a Viper 125 remote starter module please thanks a lot
Replies:
Posted By: profuse007
Date Posted: February 20, 2006 at 7:46 AM
if its the last resort, just post up the wire code and someone here will make a corresponding diagrm to it. a lot of ppl on here know DEI diagrams by heart, due to consistence wire color code.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: JamesRH
Date Posted: February 20, 2006 at 9:35 AM
I mostly concerned about programming it, (setting tach sensor and remote) It has 5 sets of plugs going into the unit, one is an antenna one is a push button one is red, yellow, pink, orange, purple going to a set of relays one is BLACK/ white, PURPLE / white, brown, grey, blue/black, blue one is black, WHITE/ blue, GREEN/ black, yellow, white, grey/black, green, blue unit also has one internal jumper, its use i dont know about either I really wish i had the papers for this unit :(
Posted By: swamprat323
Date Posted: February 20, 2006 at 10:20 AM
how old is that unit i cant find it.
Posted By: JamesRH
Date Posted: February 20, 2006 at 6:26 PM
I would say about 2002-2003 its a simple sqaure 2 button remote Future shop sold the unit (canadian best buy)
Posted By: dea,can
Date Posted: February 20, 2006 at 9:11 PM
find out the year on the back of it there will be 2 round indicators 1is for the year 2nd is the month it was made.
-------------
dragon
Posted By: JamesRH
Date Posted: February 21, 2006 at 1:31 AM
7th month of 2002
Posted By: Ravendarat
Date Posted: February 21, 2006 at 12:39 PM
OK here we go, to program tach simply start the vehicle and then press and hold the program button for 10 seconds and release. If the lights flash then it programed. The remotes come preprogrammed to the unit. What kinda car is it for, that way I dont have to list irrelevent wires.
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Posted By: JamesRH
Date Posted: February 21, 2006 at 2:29 PM
Its going in a R/T Stealth, I have all its wiring info, its not a problem
Posted By: kohara73
Date Posted: February 21, 2006 at 5:57 PM
PM me with your e-mail and I will send you a .pdf of the install manual.
-------------
Keith
Posted By: Velocity Motors
Date Posted: February 21, 2006 at 6:44 PM
Viper 125HF Installation Manual------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|