Boa 165B

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73168
Printed Date: July 07, 2025 at 7:34 PM

Topic: Boa 165B

Posted By: Trav3D1
Subject: Boa 165B
Date Posted: February 20, 2006 at 10:44 AM

I just installed a Boa 165B remote start on a 2004 Ford Explorer. I have made all of the appropriate connections and once I powered up the remote start it doesn't do anything at all. It's like the brain doesn't acknoledge the transmitter signal.

I did a search prior to posting this and noticed that this R/S has been painful for others as well. Any suggestions???? and how do you utilize the WHITE/ blue wire for testing purposes?

-------------
Trav

Replies:

Posted By: another-kelly
Date Posted: February 20, 2006 at 9:49 PM

did you program the remote to the brain?

Posted By: Trav3D1
Date Posted: February 21, 2006 at 12:18 PM

No, I did not program the remote to the brain. I don't recall reading that anywhere in the installation manual. How do you do that??

-------------
Trav

Posted By: Fastlearner
Date Posted: February 21, 2006 at 3:04 PM

Yeah it's a whole step by step process that you have to do exactly what it says. It's a pain. Make sure you have the parking lights hooked up.

Posted By: BNLUIS
Date Posted: February 21, 2006 at 3:21 PM

read the manaul, i staes that the remote must be programm, But even after that don't expect to much

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Print Page | Close Window