Print Page | Close Window

Magicar 8100?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73204
Printed Date: May 15, 2024 at 12:29 PM


Topic: Magicar 8100?

Posted By: AZ-ss
Subject: Magicar 8100?
Date Posted: February 20, 2006 at 5:21 PM

Hello,

I picked up a used vehicle that has a Magicar 8100 remote start alarm installed. Although the install looks like a rats-nest of wires, it works fine.

I plan on tidying up the install and also add a couple of features to it BUT I CANNOT FIND ANY INSTALL INFO FOR THE ALARM.

I have everything needed for the vehicle, but nothing on the alarm. What I am specificly looking for is if this alarm has domelight surveilence/courtesy. (domelight turns on when you disarm)

If anyone has this info, could you please pass it to me?

I'd greatly appreciate it.




Replies:

Posted By: Powermyster
Date Posted: February 20, 2006 at 5:53 PM
might be easier to find the compustar manual

-------------
Why oh Why didn't i take the blue pill
Darren Power




Posted By: Velocity Motors
Date Posted: February 20, 2006 at 5:54 PM
Have you looked to see if the CPU has the wiring information embossed on the back ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: AZ-ss
Date Posted: February 21, 2006 at 9:35 AM

I wish it had the info on the back, unfortunately, it doesn't.

I've already looked under compustar, but no luck. There is a section that is only for authorized dealers that I cannot access.

But after going through the wiring and by process of elimination, there is only  three  wires that I cannot figure out their purpose. From the looks of it, this model doesn't have domelight surveilance. (sigh)





Posted By: niper0108
Date Posted: February 21, 2006 at 5:27 PM
I have the wiring info. You are correct- no domelight supervision output.




Posted By: AZ-ss
Date Posted: February 21, 2006 at 6:09 PM

SNAPS!

Well thanks Niper!

ps: you have pm.






Print Page | Close Window