interior light output wire, 98 intrepid
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73236
Printed Date: July 21, 2025 at 12:18 AM
Topic: interior light output wire, 98 intrepid
Posted By: mrcllusb
Subject: interior light output wire, 98 intrepid
Date Posted: February 21, 2006 at 7:38 AM
I have a 98 intrepid with the delayed interior lights.On my clifford arrow 3,i have a gray door trigger wire,and a BROWN / white interior light output wire.I know where the gray door trigger wire goes,but where does the BROWN / white wire go?? Does it get tied into the door trigger wire?
-------------
"ole blake"
Replies:
Posted By: Velocity Motors
Date Posted: February 21, 2006 at 8:47 AM
The dome light surveillance wire is a low amp output that you need to use a relay to operate the vehicles domelight wire. For the dome light wire use the YELLOW (-) trigger wire found at the back of the fuse box in a BROWN plug.
Use this diagram ( Use diagram 1) for the relay.
https://www.velocitymotorsport.com/images/install_notes/105.jpg
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mrcllusb
Date Posted: February 21, 2006 at 4:33 PM
I see.The weird thing is,in my manual it has it wired like this,
30-yellow wire
85-12v
86-interior output wire
87-ground
87a-unused
-------------
"ole blake"
Posted By: mrcllusb
Date Posted: February 22, 2006 at 2:37 AM
Will this work either way??
-------------
"ole blake"
Posted By: mrcllusb
Date Posted: February 23, 2006 at 2:50 AM
Anyone with an answer??
-------------
"ole blake"
Posted By: Velocity Motors
Date Posted: February 23, 2006 at 11:21 AM
Yes it will work either way.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|