2006 350Z, Viper 791XV?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73249
Printed Date: July 18, 2025 at 7:29 PM

Topic: 2006 350Z, Viper 791XV?

Posted By: Trav3D1
Subject: 2006 350Z, Viper 791XV?
Date Posted: February 21, 2006 at 1:08 PM

I have a customer who has a 2006 Nissan 350Z and would like a Viper 791XV installed. I have installed many DEI products in the past, so I'm not concerned about the alarm, but does anyone have experience with this car? Please advise of the do's and don'ts.

Thanks

-------------
Trav

Replies:

Posted By: cntrylvr79
Date Posted: February 21, 2006 at 2:28 PM

The only problem I've had with a 350z is the trunk release doesn't always release properly. Though I think there was a recall on this or they fixed it with the newer ones. The other problem is if the drivers door is opened all the way an hyper extended the inch or so that it can be an held for a second the windows will roll down. This is based on 3 different cars from 03-05. I haven't played with the new ones yet so might not have these problems. Oh if you go into the door for the locks you can tag the channel 4 and 5 outputs to the lock wires so the customer can roll the windows up and down with the remote. That is if you want. Last thing there's a giant grommet on the passenger side of the car to run wires thru.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: Velocity Motors
Date Posted: February 21, 2006 at 6:36 PM

Here's a link to 350 questions from the past.Look at these posts and it will help you with your installation.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA