DEI 556U Conflict
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73329
Printed Date: May 05, 2024 at 3:13 AM
Topic: DEI 556U Conflict
Posted By: Trav3D1
Subject: DEI 556U Conflict
Date Posted: February 22, 2006 at 7:19 PM
I just installed a BOA 165B and DEI 556U on a 2004 Ford Explorer. For some reason the 556U conflicts with the second factory key if I attempt to start the truck the traditional way. No problems at all if I remote start the truck, but when I use the factory key and turn the ignition, it will not starts. Any suggestions??? ------------- Trav
Replies:
Posted By: mo12v
Date Posted: February 22, 2006 at 7:58 PM
What do you have the BLUE wire on 556 going to on BOA?
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: bazzgazm
Date Posted: February 22, 2006 at 9:09 PM
Sounds about right, your theft light is probably flashing when you try to start it by key. This would show you that the 556U is NOT turning off. It should only come on when the car is remote started. Connect the blue wire to - output durring remote start.
Posted By: Trav3D1
Date Posted: February 23, 2006 at 1:07 PM
I have the blue wire ( (-) 200mA Status Output) on the Boa connected to the blue wire on the 556U. What bazzgazm makes sense, but I'm not certain why this problem is occuring since I have the proper wire connections.
-------------
Trav
Posted By: another-kelly
Date Posted: February 23, 2006 at 1:51 PM
you didn't hook up the pink ignition wire off the 556U did ya?
Posted By: Trav3D1
Date Posted: February 23, 2006 at 3:49 PM
Yes I did. Could that be the problem?
-------------
Trav
Posted By: Ravendarat
Date Posted: February 23, 2006 at 3:56 PM
That IS the problem. Disconect that wire and it will work fine
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
|