Hello, My wiring diagram shows that the second ignition wire should be a RED / wht/gold dots, can not find it. I found a RED / white wire that has constant 12 volts but not one with gold dots. Is the 2nd ignition wire a different color? Should the wire be located in the wire harness in the steering colume? When should the second ignition wire see 12 volts? What gage wire is it? How else can I find this wire?
Thanks for your help,
Wes
All the ignition wires will be on the Ignition Harness. Some wires might be 16 or 18 gauge wire. Have fun
YEAR: 1995 MAKE: Dodge MODEL: Intrepid STYLE:
| ITEM | WIRE COLOR |POL | WIRE LOCATION |
| 12V |pink/black,red (20A) | + |ignition harness |
| STARTER |yellow/gold dots | + |ignition harness |
| IGNITION |dk. blue/gold dots | + |ignition harness |
| SECOND IGNITION |RED / wht/gold dots | + |ignition harness |
| THIRD IGNITION |*3 | | |
| ACCESSORY |BLACK/ orange | + |ignition harness |
| POWER LOCK |ORANGE / white *1 | + |wht plug back of fuse panel |
| POWER UNLOCK |pink/purple *1 | + |wht plug back of fuse panel |
| PARKING LIGHTS + |BLACK / YELLOW | |driver kick panel |
| PARKING LIGHTS - | | | |
| HEADLIGHTS |green | + |headlight switch |
| DOOR TRIGGER |tan & tan/red *2 | - |driver kick panel |
| TRUNK/HATCH PIN |BROWN / black | - |driver kick panel |
| HOOD PIN | | | |
| TRUNK/HATCH RELEASE |BLACK/ white | + |at switch |
| FACTORY ALARM ARM |lock | | |
|FACTORY ALARM DISARM |lt.GREEN/ orange 20ga | - |either kick |
| TACHOMETER |red, white, or black | |at coil pack |
| BRAKE WIRE |white | + |at brake switch |
| HORN TRIGGER |BLACK/ red | - |relay in fuse panel |
| WIPERS |pink | + |3 wire plug near wiper motor|
| LF WINDOW UP/DOWN |lt.blu/gld - wht/gld | A |in driver door |
| RF WINDOW UP/DOWN |brn/wht - pur/wht | A |in driver door or dkp |
| LR WINDOW UP/DOWN |blu/wht - RED / blk | A |in driver door or dkp |
| RR WINDOW UP/DOWN |gry/blk - grn/wht | A |in driver door or dkp |
NOTES:
*1 Also find same colors in harness to right of glove box by passenger
kick panel.
*2 Tan gets drivers door, tan/red gets pass. doors. Tap both wires and
diode isolate.
*3 The SRS (air bag) warning light may come on after remote started, after
the key is inserted and the remote start shut down with the brake. If this
happens, find an 18ga (NOT 12ga) RED / white in the ignition harness. Power
it as an Ign 3 with an additional relay.