what wire do i use for power doorlock acutator???
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7336
Printed Date: July 09, 2025 at 7:11 PM
Topic: what wire do i use for power doorlock acutator???
Posted By: tazmoe
Subject: what wire do i use for power doorlock acutator???
Date Posted: December 29, 2002 at 3:11 PM
I'm wiring up power doorlocks on a 97 Toyota Tacoma pickup truck...what wire do tap for power??? As of now this truck has no alarm so there would be a switch I will mount to control the lock/unlocking of the doors. I would like to be able to use the doorlocks even if there isn't a key in the ignition. Do I run a direct wire to the battery or tap a wire from the ignition column? If I tap from the ignition column would it be a constant 12v wire(from the 12volt info its a white wire??) or a Accessory wire(Blue/Red)? It should be the constant 12v+ wire right??? The accessory wire would mean the locks only work if the key is inserted and turned one click??
Replies:
Posted By: AlarmTech
Date Posted: December 29, 2002 at 8:44 PM
correct, if you want them to work anytime from the switch, connect the relays to the constant 12v white wire (add a 15amp fuse) wire the alarm doorlock trigger wires and the switch trigger wires to the same pins on your relays. Have your switch send a negative pulse.
-------------
Viper Equipped
|