2005 nissan titan, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73378
Printed Date: May 15, 2024 at 3:34 PM

Topic: 2005 nissan titan, remote start

Posted By: austin1123
Subject: 2005 nissan titan, remote start
Date Posted: February 23, 2006 at 5:52 PM

has anybody ahd problems with the keys losing the "codes" on all three keys while doing remstart also does anyone know how to reprogram the keys thanks

Replies:

Posted By: KarTuneMan
Date Posted: February 24, 2006 at 11:21 AM

Never have I heard of this happening..... The only fix (that Im aware of) is having keys programmed at the dealer with the nissan scan tool

Give us some more info.....are you SURE thats the problem.....cause its SO unlikely

-------------

Posted By: audiophd
Date Posted: February 24, 2006 at 11:24 AM

the probability of the key loosing the code is like me winning the lottery tonight. not gonna happen. so explain whats going on and maybe one of us can fix your problem or at least send you in the right direction.

Tony T.

Posted By: JWorm
Date Posted: February 24, 2006 at 11:51 AM

If you did erase the keys you would have to reprogram them using a Nissan computer. All keys get programmed at the same time and any keys not programmed at that time will be deleted.

Some cars it is possible for a key to be deleted if the car sees more than 1 key at the cylinder at the same time. I'm not sure if Nissans have this problem. Having all 3 keys deleted seems unlikely, unless you had them all on the same key ring.

Posted By: austin1123
Date Posted: February 24, 2006 at 4:37 PM

I thinnk that there is a issue with the bcm now that it is at the deealership they are reprograming the keys and then it will start fine but when you open the door or push in the doorpin and try to start it it will notr start and then you have to erase the code and reprogram the key again (when i isolated the door triggers and hooked it up it made the wipers & hazard light go on) so i unhooked those but still the same problem, now the whole thing is unistalled and still the same problem (door trigger wires lt. blue, RED / blue RED / yellow and RED / white) according to dei