Print Page | Close Window

viper 791xv remote problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73412
Printed Date: July 13, 2025 at 8:36 PM


Topic: viper 791xv remote problem

Posted By: alphad
Subject: viper 791xv remote problem
Date Posted: February 24, 2006 at 10:53 AM

I have the 791xv unit, it works great but over the last few days when I lock/unlock or arm/disarm the unit the led shows the unit as unlocked and then chirps 4 times..the car itself is locked or unlocked and goes thru the usual beep or beeps. so i'm guessing the problem is with the remote ??? I've switched out the battery but thats the extent of my "knowledge" on car alarms, any help is apprecaited



Replies:

Posted By: Velocity Motors
Date Posted: February 24, 2006 at 10:55 AM
Make , model & year of vehicle please.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: audiophd
Date Posted: February 24, 2006 at 11:22 AM

I have installed many 791VX viper remote start two-way paging alarms and have come to the conclusion that the antenna in the vehicle, which sends the rf to the remote, goes bad in time. you may try to get your hands on a new remote or go to your local viper dealer and see if they will let you try a new antenna




Posted By: alphad
Date Posted: February 24, 2006 at 11:28 AM
sorry its a 2003 toyota 4 runner, when I press the remote the car locks and unlocks normal but the led shows the car as unlocked/unarmed and chirps 4 times


Print Page | Close Window