alternator connection for alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73524
Printed Date: May 20, 2024 at 5:26 PM

Topic: alternator connection for alarm

Posted By: waxer52
Subject: alternator connection for alarm
Date Posted: February 26, 2006 at 7:52 AM

i finally got my alarm installed except for one connection. this is a connection for the alternator. it just says "to alternator". the guy that sold me the alarm said it had to have 4.5v with the engine not running and had to have 0v when started. i can't find this connection. please help. its a predator evo4 alarm.

Replies:

Posted By: Powermyster
Date Posted: February 26, 2006 at 6:09 PM

i've never heard of this wire only tach wire..

have you tested the wires going to the alternator

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: Ravendarat
Date Posted: February 26, 2006 at 6:17 PM

What in the hell kinda alarm is this?

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: waxer52
Date Posted: February 27, 2006 at 2:27 PM

i've sent you an e-mail powermyster of the alarm diagram. let me know what you think.

Posted By: Powermyster
Date Posted: February 27, 2006 at 6:07 PM

i didn't get anything try info at alarmwiring dot net

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: waxer52
Date Posted: February 28, 2006 at 2:42 PM

o.k. i have sent you the same diagram at that address

Posted By: Powermyster
Date Posted: March 01, 2006 at 6:11 PM

waxer i sent you a mail.

-------------
Why oh Why didn't i take the blue pill
Darren Power

Print Page | Close Window