Print Page | Close Window

Smart windows 4

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73594
Printed Date: July 18, 2025 at 8:20 PM


Topic: Smart windows 4

Posted By: ledmymotor
Subject: Smart windows 4
Date Posted: February 27, 2006 at 12:48 PM

Hi guys,

I would like to start my first post on a positive note, but sadly im in need of a bit of help!

Have just installed smart windows 4 into a 1999 Ford Fiesta (clifford concept 650 alarm).

Connected the cliff net wizard, started the programing, all seems fine, windows seem to program ok. I go to roll the windows down, seems ok, but rolls up about an inch at a time, i have to press the button about 6 times to close the window properly!

Also, if i arm the system with the windows down, they auto roll up about an inch and stop again. (and the one touch up / down doesnt work either).

Is there something stupid im missing, in either the wiring or programming? Wires are connected to the motor side.

Any ideas would be greatfully appreciated!

James




Replies:

Posted By: ledmymotor
Date Posted: February 27, 2006 at 2:04 PM

Sorted!!

After programming, pushed the done button. (cliff net) Then either apply or ok to save - didnt work

then i repeated the above, but didnt press ok or apply, just quit the program, and it works?!! strange.




Posted By: mrcllusb
Date Posted: February 27, 2006 at 4:54 PM
Well atleast you got it working..Count ur blessings..

-------------
"ole blake"


Print Page | Close Window