actuator and alarm wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73715
Printed Date: May 04, 2024 at 2:43 AM

Topic: actuator and alarm wiring

Posted By: mikemoto81
Subject: actuator and alarm wiring
Date Posted: March 01, 2006 at 2:50 AM

Ok i have after market door lock system. Each actuator has 5 wires coming out from them, and connected to a relay for "central locking". That works fine, i just need help on which wires to connect them to from the alarm. The alarm has an onboard relay for the door locks as well.

Wires i have from the actuators are purple (lock), brown (unlock), red (?), blue (?), and black (ground). From the alarm i have a wire for domelight supervision relay input #87, lock #87a normally closed, lock #30 common (output), lock #87 normally open (input), unlock #87a normally closed, unlock #30 common (output)m and unlock #87 normally open (Input).

I have a 2005 toyota tacoma, and the alarm system is a Python 700, CAn someone please guide me in the right direction to where i should connect each wire?

Your help is appreciated

-mike

Replies:

Posted By: mo12v
Date Posted: March 01, 2006 at 9:12 AM

There is probably 2 wires from your C / L Relay that, when each is pulsed to GROUND will Lock & UNLOCK the doors. If it is SPAL they should be BROWN & WHITE.
You would then hook your LOCK & UNLOCK wires from Python to those wires

Python:

Lock:

GREEN / Black = Lock wire
WHITE / Black = N/C
VIOLET / Black = GROUND

Unlock:

BLUE / Black = Unlock wire
BROWN / Black = N/C
VIOLET = GROUND

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: mikemoto81
Date Posted: March 01, 2006 at 1:28 PM

great, thats exactly what i needed.... thank you soo much!

-mike