90 toyota pickup security diagram
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73889
Printed Date: May 16, 2025 at 12:11 AM
Topic: 90 toyota pickup security diagram
Posted By: dgr8wun
Subject: 90 toyota pickup security diagram
Date Posted: March 04, 2006 at 2:40 AM
I have a 90 toyota 4x4 that came with a factory security system, and i'm planning on adding power door locks and was wondering if anyone has a wiring diagram of the factory security system. Thanks
Replies:
Posted By: KarTuneMan
Date Posted: March 04, 2006 at 1:47 PM
A factory security system.....with no power door locks...??? Are you sure?
-------------
Posted By: Scott35
Date Posted: March 04, 2006 at 4:26 PM
I ordered a new Toyota truck in 91, wasn't available, If I remember correctly.
-------------
Tacomacrew
Posted By: dgr8wun
Date Posted: March 04, 2006 at 5:45 PM
yup, its my uncle's truck and I followed the wires from the red blinking light to the alarm's brain and it said Toyota and it has a part number. i looked at the wires and figured out where to hook up the power door locks, the wire harness from the alarm had jumper connectors, i guess its so that the alarm is not spliced itno the factory harness. the colors of the wires were the same as the ones with factory door locks so i just used those as the triggers.
Posted By: KarTuneMan
Date Posted: March 04, 2006 at 5:54 PM
Well good, at least you got it fingered out...
-------------
|