Intelliguard 750

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73892
Printed Date: May 16, 2025 at 3:10 PM

Topic: Intelliguard 750

Posted By: Powermyster
Subject: Intelliguard 750
Date Posted: March 04, 2006 at 5:34 AM

about to start this install in about an hour just one thing

there is a break light input and output
input says to put to +12v constant and output to brake

but i thought both would go to brake because the blackjax needs a signal from the brake(input) and flashes the brakes(output)

or does it monitor the brakes on the output wire

-------------
Why oh Why didn't i take the blue pill
Darren Power

Replies:

Posted By: mad550
Date Posted: March 04, 2006 at 5:38 AM

Hook them both up just use a diode so the input wire doesn't sense the output wire

-------------
WOW Sight and Sound
Maroochydore
Nothing is impossible!
Do it right the first time or don't do it at all.

Print Page | Close Window