Print Page | Close Window

Impulse IMP 1010 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=739
Printed Date: July 13, 2025 at 12:17 AM


Topic: Impulse IMP 1010 alarm

Posted By: DewLover
Subject: Impulse IMP 1010 alarm
Date Posted: May 13, 2002 at 4:15 AM

I recently got an IMP 1010 car alarm, and have been installing it over the last few weeks. I have run into a problem though... I can't find the wire to hook up for the parking lights to work. The wiring diagram I was sent, says it's a green wire behind the light switch. I have checked all 4 green wires from there, and NONE test properly (powered when p-lites on only). I have also checked most of the other wires coming from the switch, but NONE of them are testing correctly. Would anyone know where I might glean this information? Thanx!!

(I have a 2001 Hyundai Accent h/b)



-------------
DewLover (Randy)



Replies:

Posted By: Velocity Motors
Date Posted: May 13, 2002 at 5:25 AM

This wire is a ( - ) output wire that tests negative when the lights are on , not positve. You will need to change the polarity over to accomodate the IMP 1010 wiring for this wire.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window