Databus for Nissan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74008
Printed Date: May 09, 2025 at 6:44 PM

Topic: Databus for Nissan

Posted By: TooDark
Subject: Databus for Nissan
Date Posted: March 05, 2006 at 9:52 PM

Where and what color is the databus wire for an 05 Nissan Maxima

Thanks
Tad

Replies:

Posted By: keither
Date Posted: March 06, 2006 at 1:17 AM

Blue is the number 6 wire coming from the canbus "high" connector. Pink or yellow is the "low" at number 14.

Posted By: TooDark
Date Posted: March 06, 2006 at 11:01 AM

That is for the 05. Is the 04 the same? My bypass has only one wire to the databas.

Posted By: TooDark
Date Posted: March 06, 2006 at 2:45 PM

found the wire I needed. Is there a way to test the data wire? (Like testing it with a logic probe?)

Posted By: TooDark
Date Posted: March 06, 2006 at 11:46 PM

I lied, well the tech lied I STILL GET FIND THE DATABUS WIRE!

Posted By: keither
Date Posted: March 07, 2006 at 7:18 AM

I don't know which bypass module that you are using, but there are two wires at the OBDII connector, there are two possibilities for your solution. One is a "high" output, the other is a "low". Depending on which mod you have will depend on which one that you'll use.

Posted By: TooDark
Date Posted: March 07, 2006 at 9:03 AM

I'm using the XY520 from Trilogic

Posted By: cosmoworks
Date Posted: March 07, 2006 at 10:38 AM

Ok, here's 5 places you can tap from on the '05 maxima (you should be able to find at least one! posted_image

)

1) From the ECU
Pin 86 CAN Communication L - Pink
Pin 94 CAN Communication H - Blue

2) From the Body Control Module (BCM)
Pin 40 CAN Communication L - Pink
Pin 39 CAN Communication H - Blue

3) FRom the DataLink Connector
Pin 14 CAN Communication L - Pink
Pin 6 CAN Communication H - Blue

4) From the A/C Amp
Pin 11 CAN Communication L - Pink
Pin 1 CAN Communication H - Blue

5) From the Display Unit
Pin 16 CAN Communication L - Pink
Pin 14 CAN Communication H - Blue

Posted By: TooDark
Date Posted: March 07, 2006 at 11:09 PM

I'm now thinking I have a bad bypass. I have tried everything. Is there a way to test for these wires with a logic proe?