94 Civic Remote Start w/Avital 4000
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74039
Printed Date: May 06, 2024 at 3:50 AM
Topic: 94 Civic Remote Start w/Avital 4000
Posted By: typerbass
Subject: 94 Civic Remote Start w/Avital 4000
Date Posted: March 06, 2006 at 5:23 PM
after reading the install manual i'm still confused on a few wires for the remote start. the WHITE/ blue, RED / blue, yellow.
WHITE/ blue - remote start (-) activation input
RED / blue - remote start (+) activation input
yellow - (+) ignition output to RF system
a little confused on what to do with these wires so any help is appreciated
Replies:
Posted By: audiophd
Date Posted: March 06, 2006 at 5:29 PM
if your using system for standalone the you would use the input wires from lets say another alarm. and the ingition output. it let the alarm see ignition as not to flase trip it with remotestart if your using a stand alone.
Posted By: sings
Date Posted: March 06, 2006 at 5:43 PM
white blue ( red blue )usually optional you could connect to a push button mounted on ur dash to start your car with the push of a button.
or use them for what the other guy said
Posted By: typerbass
Date Posted: March 06, 2006 at 5:47 PM
can you explain that one a little bit better?
Posted By: sings
Date Posted: March 06, 2006 at 5:54 PM
take the white blue wire and wire one side to one terminal of a momentary switch the other terminal of the switch to ground.
_____>WHITE/ blue______ momentary switch________ground
so when u press the momentary switch is sends that white blue wire to ground activating your remote start unit.
|