Bypass for Remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74070
Printed Date: July 13, 2025 at 1:47 PM

Topic: Bypass for Remote start

Posted By: golfnut642
Subject: Bypass for Remote start
Date Posted: March 07, 2006 at 8:27 AM

Hi I am planing to install a RS & have a bypass unit that the diagram calls for switched 12 volts ( hot through cranking) on a red wire, can anyone tell me what this means & where to hook up this wire Thanks

-------------
Lloyd Borgman

Replies:

Posted By: Acuraxtasy
Date Posted: March 07, 2006 at 8:42 AM

It means that during the period you are starting the vehicle (actual cranking of the key) an ignition wire does not loose 12v and stays on until the key is turned off. Some wires when checked during this period of cranking go dead then come back on.

Posted By: Acuraxtasy
Date Posted: March 07, 2006 at 8:45 AM

Vehicle make/model/year.....

Posted By: golfnut642
Date Posted: March 07, 2006 at 9:04 AM

Hi this is a 06 Mercury Milan Would it hurt to have 12 volts on this wire at all times or should this be hooked to the ignition one wire that is hot only when the car is running Thanks

-------------
Lloyd Borgman

Print Page | Close Window