Clifford Wizard problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74285
Printed Date: May 15, 2024 at 3:56 PM
Topic: Clifford Wizard problem
Posted By: Evolution-UK
Subject: Clifford Wizard problem
Date Posted: March 11, 2006 at 1:04 PM
I have just bought a new laptop and, as with most new laptops, it doesnt have a serial port. Have any of you guys found a way to get the system running again? I have tried a usb-serial convertor but it locks up when it goes to the interogating system part.
Any help is much appreciated.
Replies:
Posted By: electrostatic
Date Posted: March 11, 2006 at 5:03 PM
just a guess, i've never used the clifford wizard. when using converters it may be necessary to install software drivers if the o/s doesn't recognize the new hardware. did software come with the usb-serial converter and did you install it? if that's okay, the next thing i would look at is the baud rate, if thats a configurable feature of the software. whenever i have communication problems between a computer and a microcontroller board the first thing i do is make sure in the setup utility the baud rate is set correctly. hope that is of some use!
|