Print Page | Close Window

DEI 555p in 2000 Mustang

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74311
Printed Date: May 17, 2024 at 8:26 PM


Topic: DEI 555p in 2000 Mustang

Posted By: yindao
Subject: DEI 555p in 2000 Mustang
Date Posted: March 11, 2006 at 8:07 PM

I am installing a DEI remote start in a 2000 Ford mustang GT.  The installation is almost done but I need to get past PATS.  I have the DEI 555P and the instructions want me to connect:

1) The 555P pin 5 (Yellow / Black) to the Immobilizer data tap by tapping immobilizer pin 3 (usually Grey/Orange or Black).

2) The 555P pin 7 (Brown) to the Immobilizer sync tap by tapping immobilizer pin 4 (usually WHITE/ Green or Orange).

Easy except I don't know where the immobilizer unit is or another location for these two feeds.

Anyone know where the data and sync wires can be found easily?



-------------
Fast cars or fast women, that is a tough choice.



Replies:

Posted By: qdaddy
Date Posted: March 11, 2006 at 8:44 PM
remove plastic column look near key cylinder.  key cyl can be removed by inserting key turn to on position and use a straight pick to push in relaease ball jus left of key cyl


Print Page | Close Window