Print Page | Close Window

DEI 529T resistance

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74389
Printed Date: May 11, 2025 at 7:08 AM


Topic: DEI 529T resistance

Posted By: djxternal
Subject: DEI 529T resistance
Date Posted: March 13, 2006 at 8:02 AM

Hey guys I had my Viper 790XV and 529T installed by a friend of mine and it seems he set the resistance a little too high for my 529t because my sunroof goes about 1/4" farther back than it should, How do you adjust the resistance on the 529t? I would take it back to him but it is a little bit of a drive...

Thanks



-------------
-Trae



Replies:

Posted By: djxternal
Date Posted: March 13, 2006 at 8:23 PM
anyone?

-------------
-Trae



Posted By: auex
Date Posted: March 13, 2006 at 10:27 PM
529T has no resistance settings, also it is made specifically for power windows. You may have a limit switch you can tie into though.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.


Print Page | Close Window