530T and 791XV

I am in the process of installing a Viper 791XV in my car. I would like to set it up so that the 530T module rolls my windows up if warn or full alarm activates. Is there any way to do this?

To my knowledge, the only way to do this would be to wire the 530T orange wire (windows up) to the 791XV brown wire (siren). This would put the windows up either in the case of warn or full alarm. Unfortunately, I would like to have the alarm chirp on lock/unlock and this would roll up the windows as well - which is undesired. Is there some other way to wire this up so that I could get the desired affect without rolling the windows up on lock/unlock?

I am using a 508D and I could tap just this sensor however I would like this to trigger for all sensors (shock, tilt, proximity).

the ony thing you may need to do is to hook orange wire to blue and green wires from shock sensor (diode  isolate them) and hopefully the pulse is long enough.

Well, there are two zones so you're saying to hook this downstream of all sensors on both zones (diode isolated from each other)?