H3 with a manual transmission?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74452
Printed Date: May 07, 2025 at 7:31 AM

Topic: H3 with a manual transmission?

Posted By: svaillan
Subject: H3 with a manual transmission?
Date Posted: March 14, 2006 at 1:46 AM

Can an auto start alarm system be easly installed into a 2006 H3 that has a manual transmission? If so what bypasses and so forth are needed? Right now the vehicle has a Autopage RF-520LCD. Which it came with from the dealership. Was looking at going with an Autopage RS-860LCD. Thanks for any help and advice, Steve

Replies:

Posted By: Twelvoltz
Date Posted: March 14, 2006 at 7:00 AM

I am not familiar with the Autopage units, but if it does not support manual transmissions then I recommend NOT using it. There are plenty of manufacturers that offer M/T compatible units. The H3 is a GM product, so it uses Passlock for security. You will need to bypass this during the remote start, I would recommend buying a resistance learning bypass (like the DEI 556L or the GMBP from Omega). The wiring diagram for your truck can be found here.

Posted By: KarTuneMan
Date Posted: March 14, 2006 at 11:15 AM

Do NOT ruin your life, your truck, or someone elses....by "finding a way" to bypass the clutch, and running someone over. Get a unit specifically designed for a manual trans. Compustar, Astroflex, or AST.

-------------

Print Page | Close Window