db-gmdl-bp
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74485
Printed Date: May 13, 2025 at 4:00 AM
Topic: db-gmdl-bp
Posted By: CBR629
Subject: db-gmdl-bp
Date Posted: March 14, 2006 at 7:05 PM
Will this work in a 2001 chevy impala for a alarm and remote start,if so how do you wire it up and I need the wiring info.
-------------
THANKS
Replies:
Posted By: BNLUIS
Date Posted: March 14, 2006 at 7:13 PM
it will only work yhe passloc system, It will not operate door locks and factory alarm
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Posted By: CBR629
Date Posted: March 14, 2006 at 7:23 PM
Thank you
Posted By: Twelvoltz
Date Posted: March 14, 2006 at 7:24 PM
Click here for the instructions but that module does a lot more than just the passlock...kinda a waste to use it just for the Passlock. ------------- Installer, IT support, and FFL. I need less hobbies.
Posted By: CBR629
Date Posted: March 15, 2006 at 6:46 PM
I checked it out and for the 2001 chevy impala that's all it seems to do is passlock. But when i add the remote starter does any of those wires get hook to the unit?
Posted By: Twelvoltz
Date Posted: March 15, 2006 at 8:18 PM
Other than the vehicle connections, you would need to hook up the brown - status input wire. This wire is a - output from the remote start that activates the module when remote starting.
|