Viper 330v, window module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74621
Printed Date: July 19, 2025 at 3:16 AM
Topic: Viper 330v, window module
Posted By: corsasri
Subject: Viper 330v, window module
Date Posted: March 17, 2006 at 12:44 AM
hello all. i need to do a bit of modding on my alarm. the alarm i have is a VIPER 330V. cound some one point me to a wireing diagram for this alarm. or email it to me. thanks gpusey8871@aol.com
Replies:
Posted By: kobevsjordan
Date Posted: March 17, 2006 at 2:35 AM
Hello, I sent the file requested to your email address. A
Posted By: corsasri
Date Posted: March 17, 2006 at 12:20 PM
thanks fof all the info. now all i need in the info on the directed window lift module. wiring diagram.
Posted By: corsasri
Date Posted: March 19, 2006 at 6:58 AM
i have a viper 330v alarm fitted to my car and want to know if its possible to change a fuew settings with out using a bitwriter. first i want to turn the panic function of. and have 2 blips as a arm sound rather than one. gpusey8871@aol.com
Posted By: swamprat323
Date Posted: March 19, 2006 at 11:21 AM
you cant turn off the panic........that i know of, but you can turn off the arm/disarm chirps.
Posted By: swamprat323
Date Posted: March 19, 2006 at 11:25 AM
if you need the Install guide it is in the download section on this site.
Posted By: corsasri
Date Posted: March 21, 2006 at 12:34 PM
how do i get the alarm to program. i have opened the door, then turmed ignision on and then of and then closed the door and help the valet swich in. and nothing.
Posted By: swamprat323
Date Posted: March 21, 2006 at 4:15 PM
push and HOLD the valet switch for 3 secs. if wont let you do tha. open door IGN on then OFF close door you may have to turn off the DOME light
Posted By: corsasri
Date Posted: March 23, 2006 at 11:49 AM
could some one please confirm what wire from my viper 330v is send to send the signal to my window closure module. thanks
Posted By: doibuy
Date Posted: March 24, 2006 at 8:44 PM
should be orange, ground when armed output. You will have to put a diode on this wire, especially if you have a starter kill hooked up. When you arm the alarm it will send a pulse to roll up your windows. You can also use an aux channel so that you can manually roll them up.
Posted By: corsasri
Date Posted: March 27, 2006 at 7:14 AM
what is the domelight supervision uded for on my viper alarm...the BLACK/ white (-) wire
|