2006 civic factory alarm led wires
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74626
Printed Date: July 19, 2025 at 7:16 PM
Topic: 2006 civic factory alarm led wires
Posted By: 2006civic808
Subject: 2006 civic factory alarm led wires
Date Posted: March 17, 2006 at 2:07 AM
does anybody know the wiring diagram to the factory alarm led?
-------------
2006civiclx
Replies:
Posted By: Velocity Motors
Date Posted: March 17, 2006 at 10:43 AM
This would be a dealer information call. Call your local dealer for the alarm schematics and see if their nice enough to oblige to your request.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: ink313
Date Posted: March 18, 2006 at 10:41 AM
I believe the led is built into the guage assembly. I have access to Honda schematics. Let me know if you need anything.
Posted By: 2006civic808
Date Posted: March 18, 2006 at 2:10 PM
would you happen to know which wires go to the in gauge alarm led?
-------------
2006civiclx
Posted By: ink313
Date Posted: March 18, 2006 at 3:37 PM
It looks like the circuit is integrated into the module meaning there are no wires. There is a cpu in the guage assembly called the guage control module. This module "speaks" to the network of computers in the vehicle over communication wires which you cannot interact with. If you're trying to use this led with an aftermarket alarm, I don't think it's possible. If you're trying to turn off the led while remote starting, you have to disarm the alarm during remote start by sending a ground signal from the remote start to a certain wire.
|