2002 VW Golf IV, DEI 629R LED Wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74634
Printed Date: May 01, 2025 at 6:51 AM

Topic: 2002 VW Golf IV, DEI 629R LED Wiring

Posted By: hatter
Subject: 2002 VW Golf IV, DEI 629R LED Wiring
Date Posted: March 17, 2006 at 12:00 PM

I need help wiring in a scanning LED into the alarm system. I would like the LED's to
activate when I lock the doors and set the alarm with the key fob. In the instructions
supplied it suggests to wire the ground into the starter-kill relay but i'm not sure which
relay on the relay plate this is. I would have thought I could tap into one of the wires
plugged into the Comfort Control Module for a negative when armed output. Any ideas
which wire to tap?

Thanks

(See pics below for more info)

posted_image

Replies:

Posted By: Twelvoltz
Date Posted: March 17, 2006 at 12:36 PM

I do not believe that the factory module offers any type of negative when locked output. The diagram you show there references an aftermarket system that would have a negative output when armed to be used for a starter kill. I may be wrong, but I believe your only option to integrate this unit with a factory system would be to have it turn on when you turn the vehicle off.

Print Page | Close Window