Print Page | Close Window

how to you add trunk or hood pin to existing alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7477
Printed Date: July 30, 2025 at 4:41 AM


Topic: how to you add trunk or hood pin to existing alarm

Posted By: tazmoe
Subject: how to you add trunk or hood pin to existing alarm
Date Posted: January 01, 2003 at 11:51 AM

  The alarm brain module doesn't have any output for a hood/trunk pin switch...how would I go about of hooking it up to a Viper 300???  This is the pinswitch I'll be getting from PartExpress!



Replies:

Posted By: Velocity Motors
Date Posted: January 01, 2003 at 12:17 PM
Use the H1/6 wire ( BLUE for this connection. As long as it is a (-) trigger trunk switch.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: tazmoe
Date Posted: January 01, 2003 at 6:07 PM
The manual lists h1/6 as violet(+) door switch input....how am I suppose to hook it up???  The hood pin switch has to be a negative trigger???  Could you go into a lil more detail...i'm new to this.  Would it require a relay??



Posted By: AlarmTech
Date Posted: January 01, 2003 at 9:11 PM

well, th manual online shows H1/6 as BLUE instant - trigger and H1/7 as the Violet + trigger.

if your adding pinswitches, they will be negative trigger anyway.

Run wires from respective pinswitches down to kickpanel or wherever, Connect wires from hood pin switch and trunk pinswitch together, then connect to BLUE (-) instant trigger wire of the Viper 300.



-------------
Viper Equipped


Print Page | Close Window