Print Page | Close Window

control windows from main switch?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74877
Printed Date: June 13, 2024 at 6:03 AM


Topic: control windows from main switch?

Posted By: dmangru01
Subject: control windows from main switch?
Date Posted: March 21, 2006 at 9:15 PM

Hi, I have a 1998 nissan maxima. The stock keyless entry system has a window roll down feature on the stock remote, however I lost this feature when I installed a prestige 997 alarm/starter. I was considerring purchasing some window roll up/down modules, but noticed on the wirring chart that I have to access a wire from each door.

I was wondering, since the drivers side front door has a switch that controls all 4 windows, shouldn't I be able to tap into the wires from that switch and be able to control the other windows?



Replies:

Posted By: auex
Date Posted: March 21, 2006 at 10:12 PM
Throw a validity output onto the lock wire coming off of the key cylinder, may also be the same as the wire coming off of the lock switch. If you try to tap the wires coming off of window switch then you will need a window module.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: dmangru01
Date Posted: March 26, 2006 at 9:15 AM
Sorry, but what do you mean by validity output?





Print Page | Close Window